欢迎来到代码驿站!

Python代码

当前位置:首页 > 软件编程 > Python代码

python实现数通设备端口监控示例

时间:2021-06-26 08:46:48|栏目:Python代码|点击:

最近因工作需要,上面要求,每天需上报运维的几百数通设备端口使用情况【】,虽然有现成网管监控工具监控设备状态,但做报表,有点不方便,特写了个小脚本。

注:测试运行于ubuntn,需安装snmpwalk工具,

目标数通设备,需做好相关snmp配置

复制代码 代码如下:

#/usr/bin/python
#coding:utf-8

import os,sys
import re
from pprint import pprint

#甯歌???瀹舵?伴??璁惧?MIB??
MIB = {
   'public':{
        'ports':{
           'string':'.1.3.6.1.2.1.2.2.1.2',
           'status':'.1.3.6.1.2.1.2.2.1.8',   #2 down
       }
    },
   'huawei':{

   },
   'cisco':{
   }
}
#绔??g?舵??杞???
def portStatus(_s):
    if int(_s)==2:
        return 'down'
    elif int(_s)==1:
        return 'up'
    else:
        return 'none'

#?ц?绯荤??戒护snmpwalk璋???
def snmpwalk(host,publicKey,iso):
    return [i.strip() for i in os.popen('/usr/bin/snmpwalk -c %s  -v 2c %s %s'%(publicKey,host,iso)).readlines()]

def getPorts(_ip,_public,option):
    if option == 'ports':
        postsString = (j.split('=')[1].split(':')[1].replace('"','').strip() for j in snmpwalk(_ip,_public,MIB['public']['ports']['string']))
        postsStatus = (int(j.split('=')[1].split(':')[1].strip()) for j in snmpwalk(_ip,_public,MIB['public']['ports']['status']))
        return zip(postsString,postsStatus)
    else:
        print('on this commmnad')

publicKey = 'hi'  #sunmp public key

HOSTS={
    '10.221.98.2':{'type':'switch','origin':'quidway','public':publicKey},
    '10.221.98.3':{'type':'switch','origin':'quidway','public':publicKey},
    '10.221.97.108':{'type':'firewall','origin':'h3c','public':publicKey},
    '10.231.98.233':{'type':'switch','origin':'cisco','public':publicKey},
}
if __name__ == '__main__':
    for i in HOSTS.keys():
        for host,status in getPorts(i,HOSTS[i]['public'],'ports'):
            print("%s\t%s\t%s"%(i,host.ljust(30),portStatus(status).ljust(20)))
        print(''.ljust(50,'#'))

运行结果

复制代码 代码如下:

root@ubuntn12:/tmp# python snmpwalk.py
10.221.98.2     InLoopBack0                     up                 
10.221.98.2     NULL0                           up                 
10.221.98.2     GigabitEthernet0/0/0            down               
10.221.98.2     Aux0/0/1                        down               
10.221.98.2     Vlanif100                       up                 
10.221.98.2     Eth-Trunk1                      down               
10.221.98.2     Eth-Trunk1.32                   down               
10.221.98.2     Eth-Trunk1.50                   down               
10.221.98.2     Eth-Trunk1.60                   down               
10.221.98.2     Eth-Trunk1.70                   down               
10.221.98.2     Eth-Trunk1.80                   down               
10.221.98.2     Eth-Trunk1.100                  down               
10.221.98.2     Eth-Trunk1.110                  down    

上一篇:python+tkinter编写电脑桌面放大镜程序实例代码

栏    目:Python代码

下一篇:浅谈Python peewee 使用经验

本文标题:python实现数通设备端口监控示例

本文地址:http://www.codeinn.net/misctech/148358.html

推荐教程

广告投放 | 联系我们 | 版权申明

重要申明:本站所有的文章、图片、评论等,均由网友发表或上传并维护或收集自网络,属个人行为,与本站立场无关。

如果侵犯了您的权利,请与我们联系,我们将在24小时内进行处理、任何非本站因素导致的法律后果,本站均不负任何责任。

联系QQ:914707363 | 邮箱:codeinn#126.com(#换成@)

Copyright © 2020 代码驿站 版权所有