欢迎来到代码驿站!

iOS代码

当前位置:首页 > 移动开发 > iOS代码

iOS利用摄像头获取环境光感参数的方法

时间:2021-08-14 08:29:35|栏目:iOS代码|点击:

本文介绍了iOS利用摄像头获取环境光感参数的方法,分享给大家,具体如下:

不多说,代码如下:

#import "LightSensitiveViewController.h"

@import AVFoundation;

#import <ImageIO/ImageIO.h>

@interface LightSensitiveViewController ()< AVCaptureVideoDataOutputSampleBufferDelegate>

@property (nonatomic, strong) AVCaptureSession *session;

@end

@implementation LightSensitiveViewController

- (void)viewDidLoad {
  [super viewDidLoad];
  // Do any additional setup after loading the view.
  self.view.backgroundColor = [UIColor whiteColor];

  self.navigationItem.title = @"光感";
  [self lightSensitive];
}

- (void)didReceiveMemoryWarning {
  [super didReceiveMemoryWarning];
  // Dispose of any resources that can be recreated.
}

#pragma mark- 光感
- (void)lightSensitive {

  // 1.获取硬件设备
  AVCaptureDevice *device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];

  // 2.创建输入流
  AVCaptureDeviceInput *input = [[AVCaptureDeviceInput alloc]initWithDevice:device error:nil];

  // 3.创建设备输出流
  AVCaptureVideoDataOutput *output = [[AVCaptureVideoDataOutput alloc] init];
  [output setSampleBufferDelegate:self queue:dispatch_get_main_queue()];


  // AVCaptureSession属性
  self.session = [[AVCaptureSession alloc]init];
  // 设置为高质量采集率
  [self.session setSessionPreset:AVCaptureSessionPresetHigh];
  // 添加会话输入和输出
  if ([self.session canAddInput:input]) {
    [self.session addInput:input];
  }
  if ([self.session canAddOutput:output]) {
    [self.session addOutput:output];
  }

  // 9.启动会话
  [self.session startRunning];

}

#pragma mark- AVCaptureVideoDataOutputSampleBufferDelegate的方法
- (void)captureOutput:(AVCaptureOutput *)captureOutput didOutputSampleBuffer:(CMSampleBufferRef)sampleBuffer fromConnection:(AVCaptureConnection *)connection {

  CFDictionaryRef metadataDict = CMCopyDictionaryOfAttachments(NULL,sampleBuffer, kCMAttachmentMode_ShouldPropagate);
  NSDictionary *metadata = [[NSMutableDictionary alloc] initWithDictionary:(__bridge NSDictionary*)metadataDict];
  CFRelease(metadataDict);
  NSDictionary *exifMetadata = [[metadata objectForKey:(NSString *)kCGImagePropertyExifDictionary] mutableCopy];
  float brightnessValue = [[exifMetadata objectForKey:(NSString *)kCGImagePropertyExifBrightnessValue] floatValue];

  NSLog(@"%f",brightnessValue);


  // 根据brightnessValue的值来打开和关闭闪光灯
  AVCaptureDevice *device = [AVCaptureDevice defaultDeviceWithMediaType:AVMediaTypeVideo];
  BOOL result = [device hasTorch];// 判断设备是否有闪光灯
  if ((brightnessValue < 0) && result) {// 打开闪光灯

    [device lockForConfiguration:nil];

    [device setTorchMode: AVCaptureTorchModeOn];//开

    [device unlockForConfiguration];

  }else if((brightnessValue > 0) && result) {// 关闭闪光灯

    [device lockForConfiguration:nil];
    [device setTorchMode: AVCaptureTorchModeOff];//关
    [device unlockForConfiguration];

  }

}

@end

注意点:

  1. 首先引入AVFoundation框架和ImageIO/ImageIO.h声明文件
  2. 遵循AVCaptureVideoDataOutputSampleBufferDelegate协议
  3. AVCaptureSession对象要定义为属性,确保有对象在一直引用AVCaptureSession对象;否则如果在lightSensitive方法中定义并初始化AVCaptureSession对象,会造成AVCaptureSession对象提前释放, [self.session startRunning];会失效
  4. 实现AVCaptureVideoDataOutputSampleBufferDelegate的代理方法,参数brightnessValue就是周围环境的亮度参数了,范围大概在-5~~12之间,参数数值越大,环境越亮

上一篇:iOS实现图片保存与搜索功能

栏    目:iOS代码

下一篇:iOS中自带超强中文分词器的实现方法

本文标题:iOS利用摄像头获取环境光感参数的方法

本文地址:http://www.codeinn.net/misctech/166680.html

推荐教程

广告投放 | 联系我们 | 版权申明

重要申明:本站所有的文章、图片、评论等,均由网友发表或上传并维护或收集自网络,属个人行为,与本站立场无关。

如果侵犯了您的权利,请与我们联系,我们将在24小时内进行处理、任何非本站因素导致的法律后果,本站均不负任何责任。

联系QQ:914707363 | 邮箱:codeinn#126.com(#换成@)

Copyright © 2020 代码驿站 版权所有