发老兵及海洋VBS解包工具代码
时间：2020-12-02 12:04:11|栏目：VBS|点击： 次
关于为什么提供打包程序和打包压缩文件.MDB的解压
2006.asp 海阳顶端网asp木马2006版文件
unpack.vbs 打包文件"hytop.mdb"的解开器
2006x.exe 海阳顶端网asp木马2006 c/s模式转换器
2006x2.exe 海阳顶端网asp木马2006 专用短服务器端
c/s模式转换器
2006z.exe 海阳顶端网asp木马2006_lite版本组合器
用来自定义生成相应功能的lite版木马
hididi.ini 2006z.exe的配置文件
问题一：
就是你们写的小马那个文件打包/揭开。我想知道 文件打包后，我下载下来，是.mdb后缀的，那我来怎么恢复呢，比如说是将一个文件夹打包下载后，来怎么恢复呢？
回答：
请用海洋顶端asp木马2006正式版里的unpack.vbs文件进行解压！
mdb的文件名必须为hytop.mdb（也就是默认的名字)
VB解包工具中有三个VB文件。分别是三种马的解包工具
一个是海洋打包的解包工具。解HYTOP。MDB
一个是ADMIN（类似于海洋）。解PACKET。MDB
一个是老兵的解包工具。解TOMDB。TDB
注:你把VB脚本文件和MDB文件放在一个目录里，执行VB脚本就行了。要几分钟时间，稍等完成提示。（没有完成强行退出解的是不完整的包。）
unpack.vbs
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=HYTop.mdb;"
conn.Open connStr
rs.Open "FileData", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("fileContent")
stream.SaveToFile str & rs("thePath"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
打包基地老兵专用解压工具.vbs
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=ToMdb.mdb;"
conn.Open connStr
rs.Open "wz", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
thePath = rs("folder") & "\"
theFolder = Left(thePath, InStrRev(thePath, "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("body")
stream.SaveToFile str & thepath & rs("file"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
海洋解压缩工具unpack.vbs
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Packet.mdb;"
conn.Open connStr
rs.Open "FileData", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("fileContent")
stream.SaveToFile str & rs("thePath"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
2006.asp 海阳顶端网asp木马2006版文件
unpack.vbs 打包文件"hytop.mdb"的解开器
2006x.exe 海阳顶端网asp木马2006 c/s模式转换器
2006x2.exe 海阳顶端网asp木马2006 专用短服务器端
c/s模式转换器
2006z.exe 海阳顶端网asp木马2006_lite版本组合器
用来自定义生成相应功能的lite版木马
hididi.ini 2006z.exe的配置文件
问题一：
就是你们写的小马那个文件打包/揭开。我想知道 文件打包后，我下载下来，是.mdb后缀的，那我来怎么恢复呢，比如说是将一个文件夹打包下载后，来怎么恢复呢？
回答：
请用海洋顶端asp木马2006正式版里的unpack.vbs文件进行解压！
mdb的文件名必须为hytop.mdb（也就是默认的名字)
VB解包工具中有三个VB文件。分别是三种马的解包工具
一个是海洋打包的解包工具。解HYTOP。MDB
一个是ADMIN（类似于海洋）。解PACKET。MDB
一个是老兵的解包工具。解TOMDB。TDB
注:你把VB脚本文件和MDB文件放在一个目录里，执行VB脚本就行了。要几分钟时间，稍等完成提示。（没有完成强行退出解的是不完整的包。）
unpack.vbs
复制代码 代码如下:
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=HYTop.mdb;"
conn.Open connStr
rs.Open "FileData", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("fileContent")
stream.SaveToFile str & rs("thePath"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
打包基地老兵专用解压工具.vbs
复制代码 代码如下:
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=ToMdb.mdb;"
conn.Open connStr
rs.Open "wz", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
thePath = rs("folder") & "\"
theFolder = Left(thePath, InStrRev(thePath, "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("body")
stream.SaveToFile str & thepath & rs("file"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
海洋解压缩工具unpack.vbs
复制代码 代码如下:
Dim rs, ws, fso, conn, stream, connStr, theFolder
Set rs = CreateObject("ADODB.RecordSet")
Set stream = CreateObject("ADODB.Stream")
Set conn = CreateObject("ADODB.Connection")
Set fso = CreateObject("Scripting.FileSystemObject")
connStr = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=Packet.mdb;"
conn.Open connStr
rs.Open "FileData", conn, 1, 1
stream.Open
stream.Type = 1
On Error Resume Next
Do Until rs.Eof
theFolder = Left(rs("thePath"), InStrRev(rs("thePath"), "\"))
If fso.FolderExists(theFolder) = False Then
createFolder(theFolder)
End If
stream.SetEos()
stream.Write rs("fileContent")
stream.SaveToFile str & rs("thePath"), 2
rs.MoveNext
Loop
rs.Close
conn.Close
stream.Close
Set ws = Nothing
Set rs = Nothing
Set stream = Nothing
Set conn = Nothing
Wscript.Echo "所有文件释放完毕!"
Sub createFolder(thePath)
Dim i
i = Instr(thePath, "\")
Do While i > 0
If fso.FolderExists(Left(thePath, i)) = False Then
fso.CreateFolder(Left(thePath, i - 1))
End If
If InStr(Mid(thePath, i + 1), "\") Then
i = i + Instr(Mid(thePath, i + 1), "\")
Else
i = 0
End If
Loop
End Sub
上一篇：vbscript基础篇 - vbs变量定义与使用方法
栏 目：VBS
本文标题：发老兵及海洋VBS解包工具代码
本文地址：http://www.codeinn.net/misctech/28451.html
