时间：2020-10-24 11:40:45 | 栏目：.NET代码 | 点击：次
目录
一：基础
二：自旋锁示例
三：SpinLock
四：继续SpinLock
五：总结
一：基础
内核锁：基于内核对象构造的锁机制，就是通常说的内核构造模式。用户模式构造和内核模式构造
优点：cpu利用最大化。它发现资源被锁住，请求就排队等候。线程切换到别处干活，直到接受到可用信号，线程再切回来继续处理请求。
缺点：托管代码->用户模式代码->内核代码损耗、线程上下文切换损耗。
在锁的时间比较短时，系统频繁忙于休眠、切换，是个很大的性能损耗。
自旋锁：原子操作+自循环。通常说的用户构造模式。 线程不休眠，一直循环尝试对资源访问，直到可用。
优点：完美解决内核锁的缺点。
缺点：长时间一直循环会导致cpu的白白浪费，高并发竞争下、CPU的消耗特别严重。
混合锁：内核锁+自旋锁。 混合锁是先自旋锁一段时间或自旋多少次，再转成内核锁。
优点：内核锁和自旋锁的折中方案，利用前二者优点，避免出现极端情况（自旋时间过长，内核锁时间过短）。
缺点： 自旋多少时间、自旋多少次，这些策略很难把控。
ps：操作系统或net框架，这块算法策略做的已经非常优了，有些API函数也提供了时间及次数可配置项，让开发者根据需求自行判断。
二:自旋锁示例
来看下我们自己简单实现的自旋锁：
上面就是自旋锁：Interlocked.Exchange+while
1：定义signal 0可用，1不可用。
2：Parallel模拟并发竞争，原子更改signal状态。 后续线程自旋访问signal，是否可用。
3：A线程使用完后，更改signal为0。 剩余线程竞争访问资源，B线程胜利后，更改signal为1，失败线程继续自旋，直到可用。
三：SpinLock
SpinLock是net4.0后系统帮我们实现的自旋锁，内部做了优化。
简单看下实例：
四：继续SpinLock
new SpinLock(false) 这个构造函数主要用来帮我们检查死锁用，true是开启。
开启状态下，如果发生死锁会直接抛异常的。
贴了一部分源码(已折叠)，我们来看下：
// Fast path to acquire the lock if the lock is released
// If the thread tracking enabled set the new owner to the current thread id
// Id not, set the anonymous bit lock
int observedOwner = m_owner;
int newOwner = 0;
bool threadTrackingEnabled = (m_owner & LOCK_ID_DISABLE_MASK) == 0;
if (threadTrackingEnabled)
{
if (observedOwner == LOCK_UNOWNED)
newOwner = Thread.CurrentThread.ManagedThreadId;
}
else if ((observedOwner & LOCK_ANONYMOUS_OWNED) == LOCK_UNOWNED)
{
newOwner = observedOwner | LOCK_ANONYMOUS_OWNED; // set the lock bit
}
if (newOwner != 0)
{
#if !FEATURE_CORECLR
Thread.BeginCriticalRegion();
#endif
#if PFX_LEGACY_3_5
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner) == observedOwner)
{
lockTaken = true;
return;
}
#else
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner, ref lockTaken) == observedOwner)
{
// Fast path succeeded
return;
}
#endif
#if !FEATURE_CORECLR
Thread.EndCriticalRegion();
#endif
}
//Fast path failed, try slow path
ContinueTryEnter(Timeout.Infinite, ref lockTaken);
}
private void ContinueTryEnter(int millisecondsTimeout, ref bool lockTaken)
{
long startTicks = 0;
if (millisecondsTimeout != Timeout.Infinite && millisecondsTimeout != 0)
{
startTicks = DateTime.UtcNow.Ticks;
}
#if !FEATURE_PAL && !FEATURE_CORECLR // PAL doesn't support eventing, and we don't compile CDS providers for Coreclr
if (CdsSyncEtwBCLProvider.Log.IsEnabled())
{
CdsSyncEtwBCLProvider.Log.SpinLock_FastPathFailed(m_owner);
}
#endif
if (IsThreadOwnerTrackingEnabled)
{
// Slow path for enabled thread tracking mode
ContinueTryEnterWithThreadTracking(millisecondsTimeout, startTicks, ref lockTaken);
return;
}
// then thread tracking is disabled
// In this case there are three ways to acquire the lock
// 1- the first way the thread either tries to get the lock if it's free or updates the waiters, if the turn >= the processors count then go to 3 else go to 2
// 2- In this step the waiter threads spins and tries to acquire the lock, the number of spin iterations and spin count is dependent on the thread turn
// the late the thread arrives the more it spins and less frequent it check the lock avilability
// Also the spins count is increaes each iteration
// If the spins iterations finished and failed to acquire the lock, go to step 3
// 3- This is the yielding step, there are two ways of yielding Thread.Yield and Sleep(1)
// If the timeout is expired in after step 1, we need to decrement the waiters count before returning
int observedOwner;
//***Step 1, take the lock or update the waiters
// try to acquire the lock directly if possoble or update the waiters count
SpinWait spinner = new SpinWait();
while (true)
{
observedOwner = m_owner;
if ((observedOwner & LOCK_ANONYMOUS_OWNED) == LOCK_UNOWNED)
{
#if !FEATURE_CORECLR
Thread.BeginCriticalRegion();
#endif
#if PFX_LEGACY_3_5
if (Interlocked.CompareExchange(ref m_owner, observedOwner | 1, observedOwner) == observedOwner)
{
lockTaken = true;
return;
}
#else
if (Interlocked.CompareExchange(ref m_owner, observedOwner | 1, observedOwner, ref lockTaken) == observedOwner)
{
return;
}
#endif
#if !FEATURE_CORECLR
Thread.EndCriticalRegion();
#endif
}
else //failed to acquire the lock,then try to update the waiters. If the waiters count reached the maximum, jsut break the loop to avoid overflow
if ((observedOwner & WAITERS_MASK) == MAXIMUM_WAITERS || Interlocked.CompareExchange(ref m_owner, observedOwner + 2, observedOwner) == observedOwner)
break;
spinner.SpinOnce();
}
// Check the timeout.
if (millisecondsTimeout == 0 ||
(millisecondsTimeout != Timeout.Infinite &&
TimeoutExpired(startTicks, millisecondsTimeout)))
{
DecrementWaiters();
return;
}
//***Step 2. Spinning
//lock acquired failed and waiters updated
int turn = ((observedOwner + 2) & WAITERS_MASK) / 2;
int processorCount = PlatformHelper.ProcessorCount;
if (turn < processorCount)
{
int processFactor = 1;
for (int i = 1; i <= turn * SPINNING_FACTOR; i++)
{
Thread.SpinWait((turn + i) * SPINNING_FACTOR * processFactor);
if (processFactor < processorCount)
processFactor++;
observedOwner = m_owner;
if ((observedOwner & LOCK_ANONYMOUS_OWNED) == LOCK_UNOWNED)
{
#if !FEATURE_CORECLR
Thread.BeginCriticalRegion();
#endif
int newOwner = (observedOwner & WAITERS_MASK) == 0 ? // Gets the number of waiters, if zero
observedOwner | 1 // don't decrement it. just set the lock bit, it is zzero because a previous call of Exit(false) ehich corrupted the waiters
: (observedOwner - 2) | 1; // otherwise decrement the waiters and set the lock bit
Contract.Assert((newOwner & WAITERS_MASK) >= 0);
#if PFX_LEGACY_3_5
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner) == observedOwner)
{
lockTaken = true;
return;
}
#else
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner, ref lockTaken) == observedOwner)
{
return;
}
#endif
#if !FEATURE_CORECLR
Thread.EndCriticalRegion();
#endif
}
}
}
// Check the timeout.
if (millisecondsTimeout != Timeout.Infinite && TimeoutExpired(startTicks, millisecondsTimeout))
{
DecrementWaiters();
return;
}
//*** Step 3, Yielding
//Sleep(1) every 50 yields
int yieldsoFar = 0;
while (true)
{
observedOwner = m_owner;
if ((observedOwner & LOCK_ANONYMOUS_OWNED) == LOCK_UNOWNED)
{
#if !FEATURE_CORECLR
Thread.BeginCriticalRegion();
#endif
int newOwner = (observedOwner & WAITERS_MASK) == 0 ? // Gets the number of waiters, if zero
observedOwner | 1 // don't decrement it. just set the lock bit, it is zzero because a previous call of Exit(false) ehich corrupted the waiters
: (observedOwner - 2) | 1; // otherwise decrement the waiters and set the lock bit
Contract.Assert((newOwner & WAITERS_MASK) >= 0);
#if PFX_LEGACY_3_5
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner) == observedOwner)
{
lockTaken = true;
return;
}
#else
if (Interlocked.CompareExchange(ref m_owner, newOwner, observedOwner, ref lockTaken) == observedOwner)
{
return;
}
#endif
#if !FEATURE_CORECLR
Thread.EndCriticalRegion();
#endif
}
if (yieldsoFar % SLEEP_ONE_FREQUENCY == 0)
{
Thread.Sleep(1);
}
else if (yieldsoFar % SLEEP_ZERO_FREQUENCY == 0)
{
Thread.Sleep(0);
}
else
{
#if PFX_LEGACY_3_5
Platform.Yield();
#else
Thread.Yield();
#endif
}
if (yieldsoFar % TIMEOUT_CHECK_FREQUENCY == 0)
{
//Check the timeout.
if (millisecondsTimeout != Timeout.Infinite && TimeoutExpired(startTicks, millisecondsTimeout))
{
DecrementWaiters();
return;
}
}
yieldsoFar++;
}
}
/// <summary>
/// decrements the waiters, in case of the timeout is expired
/// </summary>
private void DecrementWaiters()
{
SpinWait spinner = new SpinWait();
while (true)
{
int observedOwner = m_owner;
if ((observedOwner & WAITERS_MASK) == 0) return; // don't decrement the waiters if it's corrupted by previous call of Exit(false)
if (Interlocked.CompareExchange(ref m_owner, observedOwner - 2, observedOwner) == observedOwner)
{
Contract.Assert(!IsThreadOwnerTrackingEnabled); // Make sure the waiters never be negative which will cause the thread tracking bit to be flipped
break;
}
spinner.SpinOnce();
}
}
从代码中发现SpinLock并不是我们简单的实现那样一直自旋，其内部做了很多优化。
1：内部使用了Interlocked.CompareExchange保持原子操作， m_owner 0可用，1不可用。
2：第一次获得锁失败后，继续调用ContinueTryEnter，ContinueTryEnter有三种获得锁的情况。
3：ContinueTryEnter函数第一种获得锁的方式。 使用了while+SpinWait，后续再讲。
4：第一种方式达到最大等待者数量后，命中走第二种。 继续自旋 turn * 100次。100这个值是处理器核数(4, 8 ,16)下最好的。
5：第二种如果还不能获得锁，走第三种。 这种就有点混合构造的意味了，如下：
Thread.Sleep(1) ： 终止当前线程，放弃剩下时间片 休眠1毫秒。 退出跟其他线程抢占cpu。当然这个一般会更多，系统无法保证这么细的时间粒度。
Thread.Sleep(0)： 终止当前线程，放弃剩下时间片。 但立马还会跟其他线程抢cpu，能不能抢到跟线程优先级有关。
Thread.Yeild()： 结束当前线程。让出cpu给其他准备好的线程。其他线程ok后或没有准备好的线程，继续执行。 跟优先级无关。
Thread.Yeild()还会返回个bool值，是否让出成功。
从源码中，我们可以学到不少编程技巧。 比如我们也可以使用 自旋+Thread.Yeild() 或 while+Thread.Yeild() 等组合。
五：总结
本章谈了自旋锁的基础+楼主的经验。 SpinLock类源码这块，只粗浅理解了下，并没有深究。
测了下SpinLock和自己实现的自旋锁性能对比（并行添加1000w List<int>()），SpinLock是单纯的自旋锁性能2倍以上。
还测了下lock的性能，是系统SpinLock性能的3倍以上。 可见lock内部自旋的效率更高，CLR暂没开源，所以看不到CLR具体实现的代码。